|
|
 Kjeldahl Distilling Trap Adapter, 24/40 Joints | Kjeldahl Distilling Trap Adapter, 24/40 Joints
This Kjeldahl trap features two standard taper 24/40 male socket joints. It stands 7-3/8 inches tall. The 75° angled descending arm is 4 inches long. NC-12232
|
$29.95
|
|  Liebig Condenser, 24/40, 300mm | Liebig Condenser, 24/40, 300mm
Made of Borosilicate, heat-resistant glass. Sealed inner jacket is straight and offers large surface area for efficient cooling. NC-0264
|
$39.95
|
|  Pressure Equalizing Addition Funnel, 500mL, 24/40 | Pressure Equalizing Addition Funnel, 500mL, 24/40
This 500 mL Pressure Equalizing Funnel is borosilicate glass with PTFE stopcock, standard taper 24/40 joint top and bottom, drip stem, and pressure equalizing arm. NC-13771
|
$74.95
|
|
|
 PTFE Joint Sleeve for 24/40 Ground Glass Joints | PTFE Joint Sleeve for 24/40 Ground Glass Joints
Reusable PTFE sleeves for greaseless connections are inserted between standard taper ground glass joints to prevent seizing and galling. NC-13855
|
$4.95
|
|  PTFE Thermometer Adapter, 14/20 Joint | PTFE Thermometer Adapter, 14/20 Joint
This thermometer adapter features a 14/20 standard taper joint and four Saddle O-Rings to allow placement of plain stem thermometers, gas inlet tubes, or any type of tubing from 3.8mm to 7.9mm in diameter. NC-13961
|
$34.95
|
|  PTFE Thermometer Adapter, 24/40 Joint | PTFE Thermometer Adapter, 24/40 Joint
This thermometer adapter features a 24/40 standard taper joint and a Saddle O-Ring to allow placement of plain stem thermometers, gas inlet tubes, or any type of tubing 1/4" (6mm) in diameter. Adapter has an outer O-Ring to form a tight grease free seal in a standard taper inner joint. NC-13962
|
$36.95
|
|
|
 Reaction Vessel Clamp, 150mm, Quick Release | Reaction Vessel Clamp, 150mm, Quick Release
Made entirely from stainless steel, this clamp has three sections that firmly holds together a reaction vessel and its lid. Quick release mechanism has a screw adjustment for tension applied to the flange. NC-14107
|
$64.95
|
|  Receiving Flask, 1000mL, KS 35/20 | Receiving Flask, 1000mL, KS 35/20
This is a 1L round bottom receiving flask for use with rotary evaporators. 35/20 ground glass ball-and-socket joint. Ungraduated. NC-13889
|
$56.95
|
|  Receiving Flask, 2000mL, KS 35/20 | Receiving Flask, 2000mL, KS 35/20
This is a 2L round bottom receiving flask for use with rotary evaporators. 35/20 ground glass ball-and-socket joint. Ungraduated. NC-13751
|
$99.95
|
|
|
 Reflux Coil Condenser (Dimroth), 24/40, 300mm | Reflux Coil Condenser (Dimroth), 24/40, 300mm
This Dimroth Reflux Condenser is made of 3.3 borosilicate, heat-resistant glass. Coolant flows through the tightly wrapped inner coil and returns to the top through a central tube and vapors condense inside the outer tube. NC-14109
|
$59.95
|
|  Scilogex RE100-Pro Rotary Evaporator, 1000mL or 2000mL | Scilogex RE100-Pro Rotary Evaporator, 1000mL or 2000mL
The Scilogex RE100-Pro Rotary Evaporator features a large 5L water/oil heating bath and has a temperature range from ambient to 180°C. Choice of 1L or 2L (+$67.40) options. NC-13645
|
$3,375.00
|
|  Single Neck Flat Bottom Round Boiling Flask, 24/40 Joint, 1000mL | Single Neck Flat Bottom Round Boiling Flask, 24/40 Joint, 1000mL
This 1000mL borosilicate glass single short neck boiling flask features a standard taper 24/40 ground glass mouth, globe-shape, and flat bottom. NC-13197
|
$29.95
|