250mL heavy wall cow type distribution adapter has three receivers 45° apart with 24/40 ground glass joints. Allows for collection of up to three fractions without disturbing the distilling process. Has one 3/8" port for attachment to vacuum source. NC-14148
250mL heavy wall cow type distribution adapter has a single receiver with 24/40 ground glass joints. Has one 3/8" port for attachment to vacuum source. NC-14149
This straight borosilicate glass adapter features a standard taper 24/40 outer (female socket) joint on top and a standard taper 24/40 inner (male) joint on the bottom. In addition, 9mm glass tubulation is provided for attaching a vacuum line. NC-13272
Features a standard taper 24/40 outer (female socket) joint on top and a standard taper inner (male) joint on the bottom. NC-11932
This 105° bent borosilicate glass adapter features a standard taper 24/40 outer (female socket) joint on top and a standard taper inner (male) joint on the bottom. Has a serrated connection for attachment to a vacuum source. NC-0014
This borosilicate glass 2L Biomass Flask features a 60/50 ground glass outer joint at the top and a 24/40 ground inner joint at the bottom. It is a replacement part used in our 2L Distillation Apparatus. NC-13214
This borosilicate glass 5L Biomass Flask features a 60/50 ground glass outer joint at the top and a 24/40 ground inner joint at the bottom. NC-13688
This borosilicate glass distillation arm is designed to connect a boiling flask to a condenser as part of a distillation apparatus. It is a replacement part used in our 2L Distillation Apparatus. NC-13209
This hexagonal head borosilicate hollow glass stopper has a 24/40 ground glass joint and is 2-1/2 inches in height. NC-1703
With a compression cap and O-ring to form a vacuum tight seal. Accommodates 4.25 - 7.0mm O.D. thermometer. NC-0020
With a compression cap and O-ring to form a vacuum tight seal. Accommodates 6 - 7.0mm O.D. thermometer. NC-13275
This thermometer adapter features a 14/20 standard taper joint and four Saddle O-Rings to allow placement of plain stem thermometers, gas inlet tubes, or any type of tubing from 3.8mm to 7.9mm in diameter. NC-13961
