|
|
 Bosshead Clamp Holder, Aluminum | Bosshead Clamp Holder, Aluminum
This clamp holder is heavy duty aluminum. Has thick 7mm threaded metal, single piece clamping screws. For connecting two rods at right angles. Accepts rods up to 16mm diameter. NC-12313
|
$7.95
|
|  Bosshead Clamp Holder, Powder Coated | Bosshead Clamp Holder, Powder Coated
This clamp holder is heavy duty with chemical-resistant blue powder coating. Has thick 7mm threaded metal, single piece clamping screws. For connecting two rods at right angles. Accepts rods up to 16mm diameter. NC-14042
|
$8.95
|
|  Buret Clamp, Powder Coated | Buret Clamp, Powder Coated
A buret clamp is attached to a lab stand to hold items such as small beakers, test tubes, and burets. 9-1/2 inches long with vinyl coated jaws. NC-14076
|
$15.95
|
|
|
 Chain Clamp, 2-5.5 inch | Chain Clamp, 2-5.5 inch
Chain extension clamp which will hold beakers, bottles and large equipment from 2 to 7" (5000 mL beaker). A fast and certain way to secure large equipment to a rod at any angle and variable distances from the support rod. NC-6091
|
$32.95
|
|  Hoffman Screw Compressor Tubing Clamp | Hoffman Screw Compressor Tubing Clamp
Screw compressor form with swivel lower jaw. Holds tubing up to 1 inch outside diameter; constructed of nickel plated steel. NC-7873
|
$1.40
|
|  Metal Keck Standard Taper Clip, for 24/40 Joint | Metal Keck Standard Taper Clip, for 24/40 Joint
Stainless Steel metal Keck type Original Standard Taper Clips securely holds 24/40 ground glass joints under pressure without damaging glass. Withstands temperatures up to 932°F (500°C). NC-13712
|
$5.95
|
|
|
 Plastic Keck Standard Taper Clip, for 24/40 Joint | Plastic Keck Standard Taper Clip, for 24/40 Joint
Plastic Keck type Original Standard Taper Clips securely holds ground glass joints under pressure without damaging glass. Withstands temperatures up to 302°F (150°C). NC-13636
|
$4.95
|
|  Reaction Vessel Clamp, 150mm, Quick Release | Reaction Vessel Clamp, 150mm, Quick Release
Made entirely from stainless steel, this clamp has three sections that firmly holds together a reaction vessel and its lid. Quick release mechanism has a screw adjustment for tension applied to the flange. NC-14107
|
$64.95
|
|  Ring Clamp (4 inch), Short | Ring Clamp (4 inch), Short
This steel ring clamp has a 4 inch diameter ring which can be rotated and locked at any angle. Length is 8.75 inches; 5.25 inches from center of ring to center of bosshead. NC-7913
|
$8.50
|
|
|
 Ring Clamp (5 inch), Short | Ring Clamp (5 inch), Short
This steel ring clamp has a 5 inch diameter ring which can be rotated and locked at any angle. Length is 9.25 inches; 5.5 inches from center of ring to center of bosshead. NC-13221
|
$9.95
|
|  Ring Clamp, (6 inch), Short | Ring Clamp, (6 inch), Short
This steel ring clamp has a 6 inch diameter ring. Length is 9.5 inches; 6 inches from center of ring to center of bosshead. Set screw is nickel plated steel. NC-13231
|
$10.95
|
|  Ring Clamp, (7 inch), Short | Ring Clamp, (7 inch), Short
This steel ring clamp has a 7 inch diameter ring. Length is 10.75 inches; 6.5 inches from center of ring to center of bosshead. Set screw is nickel plated steel. NC-14071
|
$11.95
|